Blog

USB vs XLR podcast microphones: which to buy

Matt MilneBy 7 min read

USB and XLR microphones can sound the same. The difference is where the electronics live: inside a USB microphone, or in a separate audio interface for XLR. Pick USB if you host alone or everyone records from their own computer. Pick XLR and an interface once two or more people share a room, because each voice then lands on its own track. For one host USB is cheaper and simpler. For two in a room the costs are close and XLR is easier to run.

On this page
  1. What is the difference between a USB and an XLR microphone?
  2. USB vs XLR at a glance
  3. What does each cost to set up properly?
  4. What do we hear in the edit?
  5. When is USB plenty?
  6. When does an interface earn its place?
  7. Pick this if

USB against XLR is usually argued as a sound quality question, with XLR cast as the grown-up choice. From the edit it looks different. Nothing in a recording tells us which cable was used. What we can tell, within a few seconds of opening an episode, is how many people shared a room and whether each of them got their own track. So this comparison is built around that: what each connection is, what it costs to set up properly in the UK, and which one suits the show you are actually making.

If you are still choosing the microphone itself, our podcast microphone buying guide names models at each budget. This page is only about the plug on the back.

What is the difference between a USB and an XLR microphone?

Every microphone turns your voice into a very quiet electrical signal. Before a computer can record it, that signal has to be made louder by a preamp and then converted into digital audio. USB and XLR differ in where those two jobs happen.

A USB microphone does both inside its own body. You plug one cable into the computer, pick the microphone as the input, and record.

An XLR microphone does neither. It sends the quiet analogue signal down a three-pin cable to a separate box, an audio interface, which holds the preamp and the converter and then connects to the computer over USB. More kit, more cables, and one more thing to learn: setting the gain by hand.

That is the whole difference. The part that picks up your voice can be identical. Rode sells its PodMic in both forms, and describes the PodMic USB as having "Analog XLR and digital USB-C connectivity" on the one body (Rode's product page). Same microphone, two ways out.

USB vs XLR at a glance

USB microphone XLR microphone and interface
What you buy The microphone The microphone, an interface, an XLR cable
Where the electronics live Inside the microphone In the interface
Setup Plug in, select it as the input Connect, set the gain, select the interface
One host Cheapest and simplest route Costs more for the same result
Two or more in one room Awkward: one computer, several separate devices What it is built for: one input and one track per person
Level control In software or on the microphone A physical gain dial per microphone
Most likely mistake The computer records its built-in microphone instead Gain set too high, so loud moments distort
Growing the show Replace the microphone, or use its XLR output if it has one Add inputs by changing the interface

What does each cost to set up properly?

These are the makers' own UK store prices on 19 November 2026, and some were sale prices that day. Retailers and sales move them, so read them as a guide to the gap between the two routes, not as the last word on either.

One host. The USB route is one purchase. The Rode PodMic USB is £189.99, and it has a headphone socket on the microphone so you can hear yourself as you record. The XLR route for the same voice is the plain Rode PodMic at £89.99 plus a one-input interface. Focusrite lists the Scarlett Solo at about £120 to £150, depending on whether it is on offer. Call it £210 to £240, plus a cable. You have paid a little more, added a box to the desk, and the recording is no better for it.

Two hosts in one room. Two PodMic USBs come to about £380. Two XLR PodMics at £89.99 each, plus a two-input Scarlett 2i2 at about £170 to £210, come to roughly £350 to £390, plus two cables. The money is close to level. The difference is in how the two setups behave, which is the next section.

Either way, "properly" includes three things that are not the microphone: a stand or arm that holds it a hand's width from your mouth, wired headphones, and a test recording you actually listen back to before the guest arrives. For USB, the check is that your software is recording the microphone and not the laptop. For XLR, it is that your loudest laugh does not push the meter into the red. Aim for peaks around -12dB and leave it there.

What do we hear in the edit?

We hear the room, the distance to the microphone and the gain setting. We do not hear the connector.

What the connector changes is the shape of what arrives. An editor wants one file per voice. With each person on their own track, a cough can be removed from one voice without touching the other, a quiet guest can be lifted without lifting the host's keyboard, and two people talking over each other can be untangled.

The shows we edit that record in a room arrive that way: one audio file per microphone, which is what an interface or recorder with an input for each person gives you. One client's own recording checklist asks for the same thing every episode: three camera angles and two audio files. On another show, one episode came in with a WAV file per microphone, each around 700MB. Our remote shows reach the same place by a different road: every guest is on their own computer, so the recording platform hands over a separate file per speaker, and a USB microphone at each end is all anyone needs. We covered that side in Riverside vs Zoom for podcast recording.

Where USB runs out is two people at one table. A computer treats each USB microphone as its own separate sound device, and most recording software listens to one device at a time. There are workarounds, and they are the kind that fail quietly on the day. The usual result is that one microphone ends up doing the work for two people, and the second voice is distant on every line.

When is USB plenty?

  • You host alone.
  • You interview remotely, and each person records from their own computer.
  • You want the fewest things between sitting down and pressing record.
  • You are proving the show works before spending more on it.

That covers most new podcasts. A dynamic USB microphone, used close, in a soft room, gives an editor everything they need. Our equipment guide across three budgets builds the whole starter setup around one.

When does an interface earn its place?

  • Two or more people share a room. This is the real dividing line.
  • You already own, or badly want, an XLR-only microphone. The Shure SM7B is the famous one, at £409 on Shure's UK site, and it needs a good deal of clean gain. Shure's own page points buyers who are unsure about that towards the SM7dB, which has a preamp built in.
  • You want a physical dial for each voice, so levels can be nudged mid-conversation without opening a settings window.
  • You expect to add a third or fourth chair. An interface with more inputs replaces the old one and every microphone stays.

Pick this if

Pick USB if you record alone or with remote guests. It costs less, there is less to get wrong, and the files are just as good.

Pick XLR and an interface if two or more of you sit in the same room, now or within the next few months. It is the dependable way to get one file per voice.

Pick a microphone with both outputs if you are not sure which of those you will be in a year. Start on USB, and move to an interface when a second chair appears.

Whichever you choose, send your editor separate tracks and a recording that does not clip, and the connection will never come up again. That is the point where we take over: a full episode edit at Joycast is £280, billed per four-week cycle with no minimum term, and revisions carry on until you are happy. You can see every rate on the pricing page, or tell us about your show and we will say what we would do with it.

Once it's recorded, you can see what goes into our full episode edit and what we charge for it.

Sources

  1. Rode: PodMic USB product page (UK)
  2. Rode: PodMic product page (UK)
  3. Focusrite: Scarlett Solo product page
  4. Focusrite: Scarlett 2i2 product page
  5. Shure: SM7B product page (UK)

Send us your next recording.

Price your show